Preamble
This Code of Ethics and Business Conduct (the "Code") sets forth the principles, internal obligations, and operating rules applicable within Iknaé Techno, regardless of the nature of the contract, function, seniority level, or place where services are performed. Its purpose is to prevent integrity breaches, define the standards of conduct expected, and govern the conduct of business in compliance with applicable law, the Company’s contractual commitments, the requirements of its business partners, and relevant professional standards.
This Code is grounded in the French anti-corruption framework as interpreted by the French Anti-Corruption Agency (Agence française anticorruption, "AFA"), which states that an anti-corruption compliance program rests on three inseparable pillars: management commitment, risk mapping, and the implementation of prevention, detection, control, and remediation measures and procedures. This Code is drafted in clear, unambiguous terms and is intended to be made binding upon personnel by any appropriate means; where internal rules exist or must be adopted, the anti-corruption code of conduct is intended to be incorporated into them in accordance with applicable formal requirements.
This Code is also intended to satisfy the heightened standards that may be required by certain Iknaé Techno partners. Accordingly, where contractual commitments undertaken toward a partner, an applicable professional rule, or this Code imposes a stricter requirement than that resulting from local practice, the stricter requirement shall apply, subject to compliance with mandatory applicable laws.
Article 1Purpose and Objectives
1.1. This Code defines the rules of conduct applicable to officers, employees, corporate officers, temporary workers, interns, apprentices, consultants acting under the authority of the Company and, where contractually provided, to business partners, introducers, subcontractors, suppliers, distributors, sales agents, and any other third party acting on behalf of or in the interest of Iknaé Techno.
1.2. This Code pursues the following objectives:
- to prevent and detect any conduct likely to constitute an integrity breach, including corruption, influence peddling, forgery, misuse of corporate assets, money laundering, favoritism, unlawful taking of interest, or misappropriation of assets, within the scope relevant to the Company’s activities;
- to protect Iknaé Techno’s reputation, tangible and intangible assets, information, economic interests, and ability to conduct business fairly;
- to ensure that decisions and transactions comply with applicable laws, regulations, contractual commitments, and internal procedures;
- to provide a disciplinary and behavioral framework enabling prohibited practices, vigilance obligations, and reporting procedures to be identified;
- to ensure a level of precision and rigor consistent with the compliance standards expected by the Company’s business partners.
1.3. This Code is a framework document that may be supplemented by policies, procedures, memoranda, charters, delegations, authorization matrices, and specific contractual clauses, including with respect to gifts and hospitality, conflicts of interest, procurement, subcontracting, expenses, sponsorship, charitable giving, commercial representation, lobbying, data protection, information security, international trade, and dealings with government.
Article 2Personal, Subject-Matter, and Territorial Scope
2.1. This Code applies to all Iknaé Techno personnel, whether on a permanent or occasional basis, in France and abroad, during working time, in the course of business travel, business relationships, interactions with authorities, sales, procurement, hiring, financial management, and any activity that may expose the Company to liability.
2.2. Members of management are subject to an enhanced duty of exemplarity. The AFA states that governing bodies initiate, validate, deploy, and oversee the anti-corruption program, allocate appropriate resources, participate in certain sensitive decisions, and ensure that proportionate sanctions are actually imposed in the event of a breach of the Code.
2.3. Third parties presenting risk or having a significant business relationship with Iknaé Techno may be contractually required to comply with all or part of the principles of this Code, including through integrity clauses, cooperation obligations, audit rights, conflict-of-interest disclosure obligations, and rights of suspension or termination in the event of a serious breach or proven integrity risk.
Article 3Guiding Principles of Business Conduct
3.1. Every person subject to this Code shall act with integrity, loyalty, good faith, sound judgment, appropriate transparency, impartiality, and professional diligence.
3.2. The following are prohibited in particular:
- any circumvention of authorization, approval, competitive bidding, segregation-of-duties, or control procedures;
- any concealment, alteration, intentional omission, or falsification of information, supporting documents, accounting entries, reports, indicators, deliverables, or audit trails;
- any use of the Company’s assets, resources, tools, data, funds, or means for personal, unlawful, or non-corporate purposes;
- any conduct likely to impair the independence of professional judgment or compromise the integrity of a decision.
3.3. Each person is required to know the rules applicable to his or her activity, seek prior advice in case of doubt, retain relevant supporting documents, and cooperate in good faith with controls, audits, internal investigations, and remediation actions.
Article 4Compliance with Laws, Regulations, and Internal Rules
4.1. No commercial, technical, financial, or operational objective may justify the violation of a mandatory rule, a material contractual requirement, an internal standard, or an integrity commitment.
4.2. Every person subject to this Code must:
- comply with the laws and regulations applicable to his or her duties;
- apply the internal procedures in force;
- promptly raise any instruction that is manifestly unlawful, irregular, or contrary to this Code;
- refrain from carrying out any transaction where a reasonable assessment identifies a serious risk of illegality, corruption, fraud, unmanaged conflict of interest, or violation of internal control restrictions.
4.3. Managers have the additional duty to disseminate the rules, monitor compliance with them, and ensure that team members have the means, information, and training necessary to comply.
Article 5Prevention of Conflicts of Interest
5.1. A conflict of interest exists where a personal, proprietary, family, financial, political, or professional interest, whether direct or indirect, is likely to influence, appear to influence, or compromise the independent, objective, and loyal performance of a duty within Iknaé Techno.
5.2. Any concerned person must promptly disclose in writing to his or her manager and/or the compliance officer or designated department any actual, potential, or apparent conflict of interest, including in the following situations:
- participation in the selection, negotiation, evaluation, or approval of a third party with whom a personal or financial relationship exists;
- holding an interest, directly or through an intermediary, in a competitor, customer, supplier, partner, or acquisition target;
- outside activity, corporate office, elected office, secondary activity, or advisory role likely to interfere with Iknaé Techno’s interests;
- the hiring, evaluation, promotion, or supervision of a relative;
- any situation in which the objectivity owed in relation to a business partner could reasonably be questioned.
5.3. Following disclosure, appropriate preventive measures shall be decided, including recusal, withdrawal, enhanced review, collegial approval, reassignment, access restrictions, or termination of the incompatible situation.
5.4. Failure to disclose a conflict of interest, or submitting an inaccurate disclosure, may expose the individual concerned to disciplinary action, without prejudice to any civil or criminal proceedings, where applicable.
Article 6Gifts, Invitations, Benefits, and Hospitality
6.1. Gifts, invitations, meals, travel, lodging, benefits in kind, or any other form of hospitality may be offered, requested, or accepted only if they satisfy all of the following conditions:
- they serve a legitimate business purpose;
- they are reasonable and proportionate in value;
- no quid pro quo is expected or suggested;
- they comply with the law, lawful business customs, the recipient’s rules, and internal procedures;
- they are traceable and, where required, subject to prior approval.
6.2. The following are strictly prohibited:
- cash, cash equivalents, anonymous gift cards, or equivalent benefits;
- gifts or invitations during a tender, vendor selection, audit, sensitive negotiation, administrative review, or regulatory decision-making process where they may influence or appear to influence the outcome;
- benefits intended for a public official or politically exposed person without enhanced prior review and written approval in accordance with Company procedures;
- hidden, split, or inaccurately recorded benefits;
- any courtesy, expenditure, or hospitality that could not be publicly disclosed without embarrassment to the Company, its partner, the recipient, or a concerned third party.
6.3. Any recipient of a gift, courtesy, or entertainment remains personally responsible for ensuring that its acceptance is proper, lawful, and free from any appearance of improper consideration.
6.4. The AFA recommends that policies relating to gifts and invitations be integrated into the code of conduct or its appendices in a coherent and accessible manner.
Article 7Anti-Corruption and Influence Peddling
7.1. Zero-tolerance principle. Iknaé Techno strictly prohibits all forms of active or passive corruption, whether public or private, and all forms of influence peddling, in France and abroad. Accordingly, no person may promise, offer, solicit, accept, give, or receive, directly or indirectly, any undue advantage of any kind for the purpose of obtaining, retaining, accelerating, steering, or rewarding a decision, act, omission, contract, payment, information, or favorable treatment.
7.2. According to the AFA, an anti-corruption code of conduct must define and illustrate, in light of the risk mapping, the various types of conduct to be prohibited as potentially constituting integrity breaches; it must be clear, introduced by management, and made binding on personnel.
7.3. The following are prohibited in particular, without limitation:
- facilitation payments, including small-value payments, intended to expedite an administrative, customs, technical, or operational formality;
- kickbacks, secret commissions, overbilling, coordinated underbilling, fictitious invoices, contracts without real services, or services insufficiently documented;
- the use of an intermediary, consultant, sales agent, business introducer, or partner where the compensation, mission, qualifications, reputation, or conditions of engagement present unresolved red flags;
- any offer or grant of an advantage to a public official, elected official, candidate, administrative employee, public body, state-owned enterprise, or person entrusted with a public service mission for the purpose of influencing a decision;
- any solicitation or acceptance of an advantage in exchange for a real or supposed intervention with an authority, administration, principal, or decision-maker;
- any funding, donation, sponsorship, charitable contribution, hiring, internship, consulting engagement, or partnership used as an indirect vehicle for corruption or influence peddling.
7.4. Any transaction involving an intermediary, prospect, supplier, subcontractor, consortium partner, distributor, public official, public contract, administrative authorization, high-risk country, cash payment, third-party account, opaque structure, or unusual request shall be subject to diligence proportionate to the risk, in accordance with the risk-based approach promoted by the AFA.
7.5. Where a weak or strong indicator of corruption or influence peddling is identified, the transaction shall be suspended pending review by the competent internal authority. Any refusal to apply such suspension constitutes a serious breach.
7.6. Red flags may include, in particular:
- absence of a clear business justification;
- compensation disproportionate to the expected service;
- a request for payment in a country unrelated to the transaction;
- a request for payment in cash or to a non-contractual account;
- refusal to provide identification, ownership, or reference information;
- use of a third party imposed by a decision-maker;
- abnormal urgency or refusal of controls;
- incomplete or inconsistent contractual documentation;
- business or representation expenses atypical in light of the context.
7.7. Specific controls. In accordance with AFA guidance, the prevention and detection of integrity risks must be supported by preventive measures, an internal reporting mechanism, internal controls, and accounting controls targeting the risk situations identified in the risk mapping.
7.8. Any violation of this Article may give rise, depending on the circumstances, to disciplinary action up to and including dismissal for serious misconduct, revocation of office, termination of the relevant commercial agreement, liability actions, and/or referral to competent authorities.
Article 8Third-Party Relationships and Integrity Due Diligence
8.1. Before entering into a business relationship and during the relationship, Iknaé Techno may conduct integrity due diligence on third parties based on the level of risk, the nature of the services, location, ownership structure, interactions with the public sector, reputation, background, and the economic coherence of the transaction. The AFA states that the depth of such due diligence should be determined by homogeneous groups of third parties and that the riskiest third parties should be subject to enhanced measures.
8.2. No engagement may be entered into or renewed without sufficient documentation enabling the third party, its beneficial owners where relevant, the actual purpose of the engagement, the level of compensation, the payment arrangements, and the required integrity commitments to be identified.
8.3. Depending on the circumstances, higher-risk contracts shall include clauses relating to:
- compliance with anti-corruption laws and this Code;
- documentary cooperation;
- audit rights;
- disclosure of conflicts of interest;
- prohibition of subcontracting without authorization;
- the ability to suspend payments, terminate, or decline renewal in the event of serious suspicion or an established breach.
Article 9Accuracy of Books, Records, and Accounting Controls
9.1. Every transaction, regardless of amount, must be recorded accurately, fairly, completely, supportably, and within a time frame consistent with accounting rules and internal procedures.
9.2. The following are prohibited:
- inaccurate, ambiguous, or insufficiently documented entries;
- undisclosed or off-system accounts;
- fictitious invoices, duplicate payments, sham expense claims, or artificial accounting allocations;
- misleading descriptions intended to conceal the true nature of a payment or benefit;
- side agreements, whether oral or written, that are unauthorized and not faithfully reflected in the relevant contractual or accounting documentation;
- inappropriate document alterations, execution by unauthorized signatories, or undisclosed or unrecorded funds or assets connected with a business transaction.
9.3. The AFA states that accounting controls are intended to ensure that books, records, and accounts are not used to conceal integrity breaches and that they should target the risk situations highlighted by the risk mapping.
9.4. Any person involved in committing, confirming performance of, authorizing, paying, or recording an expense must comply with rules on segregation of duties and traceability of approvals, principles also emphasized by the AFA in relation to accounting controls.
Article 10Protection of Assets, Information, and Systems
10.1. Iknaé Techno’s tangible and intangible assets, including software, source code, equipment, data, trade secrets, intellectual property rights, contractual documents, financial resources, and digital tools, may be used only for legitimate business purposes, unless expressly authorized otherwise.
10.2. Each person must ensure the appropriate confidentiality, integrity, availability, and traceability of the information to which he or she has access. Unauthorized sharing of confidential information, use of unapproved tools where doing so exposes the Company to significant risk, and any extraction, retention, or transmission of data contrary to internal or legal rules are prohibited.
10.3. Any suspicion of intrusion, data loss, cyber fraud, misuse of access credentials, or account compromise must be reported immediately in accordance with the internal security procedure.
10.4. It is also prohibited to use, reproduce, transfer, publish, or disclose, without authorization, confidential information, patented technology, copyrighted software, documentation, or other materials belonging to a partner or third party, except to the extent strictly necessary for the proper performance of contractual obligations.
Article 11Fair Competition, Procurement, and Business Relationships
11.1. Iknaé Techno conducts its business fairly and prohibits any anti-competitive, deceptive, unfair, or abusive practice.
11.2. Purchasing and sales decisions must be based on objective, traceable, and verifiable criteria, such as quality, price, competence, security, execution capacity, compliance, performance, and risk control.
11.3. Any derogation from a competitive bidding, vendor selection, qualification, or enhanced approval procedure must be justified, documented, and approved by the competent authority.
Article 12Reporting Mechanism and Protection of Whistleblowers
12.1. In accordance with AFA guidance, the internal reporting mechanism enables reports to be made concerning conduct or situations contrary to the code of conduct or likely to constitute integrity breaches; it must be adapted to the organization’s risks, accessible, and designed to ensure the protection of the reporting person acting in good faith.
12.2. The French Labor Code further provides that internal rules must recall the existence of the whistleblower protection mechanism established by the law of December 9, 2016.
12.3. Iknaé Techno shall establish one or more secure reporting channels enabling, under conditions that ensure confidentiality, reports to be made concerning in particular:
- a violation of this Code;
- corruption, influence peddling, fraud, misappropriation, a concealed conflict of interest, accounting falsification, or any other integrity breach;
- pressure exerted to induce a rule violation;
- a serious failure of a control or procedure.
12.4. Reports may be received and processed by one or more authorized persons bound by strict confidentiality. Access shall be limited to authorized participants only, in accordance with AFA guidance.
12.5. No person who has made a report in good faith, or refused to participate in an unlawful act, may be subject to retaliation, discrimination, sanction, or adverse treatment on that basis.
12.6. The procedures governing the receipt, review, retention, closure, and, where applicable, destruction of reporting records shall be specified by internal procedure, in compliance with applicable personal data protection and confidentiality rules; the AFA specifically recommends defining the responsible persons, confidentiality rules, handling timelines, and monitoring indicators.
Article 13Controls, Internal Audits, and Investigations
13.1. Iknaé Techno shall maintain an internal control and audit framework adapted and proportionate to its risks. The AFA states that such a framework is intended to prevent and detect integrity breaches, verify the effectiveness of prevention and detection measures, and may comprise up to three autonomous levels of control.
13.2. Every person subject to this Code must fully cooperate with audits, documentary reviews, internal controls, accounting controls, and internal investigations, respond truthfully to authorized requests, and produce requested documents within the required time frames.
13.3. Obstruction of a control, destruction of evidence, concealment of information, intentional withholding of documents, or provision of false information constitutes a serious disciplinary breach.
Article 14Training, Awareness, and Managerial Responsibility
14.1. The AFA recommends general awareness training for all personnel and mandatory risk-based training for managers and the personnel most exposed; the identification of recipients and the content of training must be based on the risk mapping.
14.2. Iknaé Techno shall organize initial and ongoing awareness and training actions, the frequency, content, traceability, and knowledge assessments of which shall be defined according to the risks, functions, and responsibilities of each person.
14.3. Managers are responsible for the operational dissemination of the Code, the exemplary nature of their conduct, escalation of incidents, reporting of risk situations, and effective implementation of corrective measures decided upon.
14.4. Where required by a contract or by partner status, periodic targeted training and regular compliance reviews may be imposed on the relevant personnel in order to ensure compliance with applicable enhanced requirements.
Article 15Disciplinary Measures and Corrective Actions
15.1. In accordance with AFA guidance, established violations of the code of conduct or conduct capable of constituting integrity breaches must give rise to appropriate and proportionate sanctions, as well as corrective measures and follow-up of their implementation.
15.2. Depending on the seriousness of the facts, their intentional nature, the position held, any repetition, the existence of harm, the cooperation of the person concerned, and the applicable rules, sanctions may include, in particular, reminder, warning, reprimand, disciplinary suspension, disciplinary transfer, demotion, dismissal for cause, dismissal for serious or gross misconduct, revocation of office, or termination of contractual relations with a third party.
15.3. Independently of individual sanctions, Iknaé Techno may adopt any useful remediation measure, including reinforcement of controls, suspension of a transaction, review of a third-party portfolio, amendment of a procedure, supplemental training, targeted audit, restitution of an improperly received benefit, liability action, filing of a complaint, or referral to competent authorities, where required or deemed appropriate.
Article 16Governance, Updates, and Retention of Compliance Evidence
16.1. The governing body validates this Code, ensures its dissemination, allocates sufficient resources, and oversees its effective implementation, in accordance with AFA guidance.
16.2. This Code shall be reviewed periodically and whenever there is a significant change in activities, organization, locations, risks, legal framework, or lessons learned from controls and reports.
16.3. The AFA recommends that documents and information forming part of the anti-corruption framework, together with the methods used for their preparation and updates, be retained and archived so as to ensure auditability, subject to compliance with data protection and retention-period rules.
Article 17Effective Date and Enforceability
17.1. This Code shall enter into force on the date set by decision of Iknaé Techno’s management.
17.2. It shall be communicated by any means ensuring accessibility, intelligibility, and traceability. Where legal conditions are met, provisions intended to fall within internal rules or to be incorporated into them shall be implemented in accordance with the applicable legal formalities, including, where appropriate, consultation with competent bodies and any required filing and publication formalities.
17.3. Every person subject to this Code is required to read it, comply with it strictly, and, where required by the Company, acknowledge having read it and undertaken to comply with it.
Article 18Partner Relationships, Cooperation, and Compliance Audits
18.1. Where Iknaé Techno acts within the framework of a partnership, distribution, resale, subcontracting, or services arrangement subject to specific compliance requirements, the Company and the relevant persons shall comply, in addition to this Code, with the contractual, documentary, due diligence, cooperation, and audit obligations imposed by the partner, provided that such obligations are lawful.
18.2. Iknaé Techno shall respond truthfully, accurately, completely, and within a reasonable time to requests for information or documents made in connection with a partner’s onboarding, approval, listing, certification, monitoring, or due diligence processes.
18.3. The Company may be required to provide information relating to its structure, its beneficial owners where relevant, its potential conflicts of interest, its regulatory compliance, its internal controls, and any other element necessary to assess its integrity or continued eligibility for the business relationship.
18.4. Every concerned person shall cooperate in good faith with any audit, documentary review, compliance control, or investigation contractually provided for by a partner and shall refrain from withholding information, obstructing review, altering documents, or providing misleading responses.
18.5. Failure to cooperate, the provision of inaccurate or incomplete information, or a serious violation of a compliance requirement applicable to the relationship with a partner may justify suspension of a transaction, implementation of corrective measures, ineligibility for certain contractual benefits, or termination of the business relationship in accordance with the applicable terms.
Article 19Dealing with Government
19.1. Interactions with administrations, authorities, local governments, public institutions, public international organizations, state-owned enterprises, public healthcare bodies, public educational institutions, utilities, and more generally any public-sector entity are subject to stricter rules than those applicable to private-sector dealings.
19.2. Any person involved in a transaction relating to the public sector must know and comply with all applicable laws, regulations, public procurement rules, tender procedures, invoicing obligations, payment requirements, and traceability standards applicable to the relevant transaction.
19.3. It is prohibited to seek, obtain, accept, use, or disclose, directly or indirectly, procurement-sensitive information, pre-award information, source selection information, competitor proposal information, or any other protected or nonpublic information relating to a public procurement process where there is reason to believe that disclosure is unauthorized.
19.4. Invoices, statements, certifications, attestations, and payment requests submitted to a public entity must be accurate, complete, substantiated, truthful, and compliant with contractual and regulatory requirements.
19.5. Except as expressly permitted by law and applicable procedures, it is prohibited to offer, promise, provide, or finance, directly or indirectly, any gratuity, gift, favor, entertainment, meal, travel, lodging, loan, contribution, benefit in kind, or other thing of value for the benefit of a public official, government employee, elected official, candidate, employee of a public body, or any relative of such a person.
19.6. Contingent fees for obtaining a government contract, referral fees, influence programs, kickbacks, secret commissions, and more generally any mechanism intended to obtain or reward improper favorable treatment in connection with a public-sector relationship are likewise prohibited.
19.7. Specific and proportionate internal controls must be implemented to prevent, detect, and trace expenses, commitments, approvals, third-party interventions, and financial flows relating to the public sector.
Article 20Competition, Antitrust, and Commercial Practices
20.1. Iknaé Techno strictly complies with the competition laws applicable in the jurisdictions where it operates. Any practice having the object or effect of unlawfully restricting competition is prohibited.
20.2. It is prohibited, directly or indirectly, with any competitor, partner, intermediary, or other third party, to enter into any agreement, arrangement, concerted practice, or exchange of information having the object or effect of:
- fixing, maintaining, controlling, or harmonizing prices, discounts, margins, costs, profits, or other commercial conditions;
- rigging a tender, including cover bids, courtesy bids, coordinated abstention, bid rotation, or coordinated bidding;
- allocating markets, customers, territories, distribution channels, or business segments;
- limiting production, sales, innovation, or the availability of a product or service;
- boycotting a supplier, customer, or category of operator.
20.3. It is also prohibited to participate in discussions or exchanges concerning commercially sensitive information, including prices, costs, margins, volumes, forecasts, quotations, tenders, pricing policies, capacities, commercial intentions, or customer-specific data, where such exchange is not objectively necessary, lawful, and duly controlled.
20.4. Also prohibited are practices such as predatory pricing, tie-in sales, certain unjustified exclusivity arrangements, agreements imposing minimum resale prices, unlawful discrimination between competing customers, unfair methods of competition, and deceptive practices.
20.5. Any solicitation encouraging a person subject to this Code to engage in anti-competitive conduct, including where such solicitation emanates from a partner, customer, supplier, or representative of another company, must be refused and promptly reported in accordance with internal procedures.
Article 21Enhanced Rules on Business Courtesies, Facilitation Payments, and Representation Expenses
21.1. In addition to the rules set forth in Article 6, any expense for representation, demonstration, hospitality, travel, or hosting involving a business partner, prospect, customer, prescriber, or intermediary must be reasonable, ordinary, proportionate, supported by a legitimate business purpose, and properly documented.
21.2. No expense, even of small value, may be incurred where it could reasonably be construed as a bribe, an improper advantage, an attempt to secure unfair preferential treatment, or a means of circumventing a legal, regulatory, contractual, or internal prohibition.
21.3. Facilitation payments are strictly prohibited, including where intended to expedite a filing, authorization, approval, utility connection, customs clearance, permit issuance, inspection, or any other routine governmental or administrative action.
21.4. The term "thing of value" shall be construed broadly and includes, in particular, cash, gifts, meals, entertainment, travel, personal expenses, donations, charitable contributions, internships, employment opportunities, free services, unjustified discounts, or any other direct or indirect advantage.
Article 22International Trade, Sanctions, Exports, and Boycotts
22.1. Every person subject to this Code must comply with all applicable laws and regulations relating to international trade, imports, exports, re-exports, dual-use controls, technology transfers, economic sanctions, and restrictions on use.
22.2. No goods, technology, technical data, software, information, documentation, materials, services, or direct products of services may be imported, exported, re-exported, transferred, made available, or used in violation of any applicable law, sanction, license condition, destination restriction, end-user control, or prohibition.
22.3. Every international transaction must be subject to appropriate checks in light of the destination, transit, or origin country, the identity of counterparties, the end user, the end use, sanctions lists, filing obligations, and required authorizations.
22.4. Participation in any economic boycott not authorized by the competent authorities, providing information that could be construed as support for such a boycott, or circumventing applicable sanctions or embargo rules is prohibited.
Article 23Securities, Material Nonpublic Information, and Sensitive Transactions
23.1. Any person who, in the course of his or her duties or business relationships, has access to material, privileged, sensitive, or nonpublic information relating to Iknaé Techno, a partner, a customer, a supplier, or any other company must preserve the strict confidentiality of such information and refrain from any improper use of it.
23.2. It is prohibited to use material nonpublic information to buy, sell, cause the purchase or sale of, or recommend the purchase or sale of securities, derivatives, or any other relevant financial instruments, directly or indirectly, for one’s own account or for the account of another.
23.3. It is likewise prohibited to communicate material nonpublic information to any third party, including a relative, where there is a risk that such information may be used for investment, trading, or arbitrage purposes.
23.4. Material nonpublic information may include, in particular, information relating to financial results, liquidity, forecasts, an acquisition, divestiture, merger, strategic partnership, award or termination of a major contract, significant litigation, an investigation, a change in leadership, a financing event, or the gain or loss of a significant customer.
Article 24Advertising, Marketing, Commercial Communications, and Commitments Toward Partners
24.1. Any commercial communication, advertisement, marketing document, presentation, proposal, demonstration, statement, certification, or representation concerning Iknaé Techno’s products, services, capabilities, certifications, or references, or those of a partner or competitor, must be accurate, fair, verifiable, proportionate, and free from misleading omission.
24.2. The following are prohibited:
- false or misleading statements about a product, service, or capability;
- claims unsupported by sufficient factual substantiation;
- false or disparaging statements about a competitor or its offerings;
- use of a partner’s or third party’s trademark, logo, trade name, documentation, or other distinctive sign in a manner likely to mislead a customer as to origin, authorization, endorsement, certification, or the scope of a business relationship.
24.3. Personnel involved in selling, negotiating, listing, contracting for, or performing services involving a partner must understand and honor the applicable contractual terms and ensure that all communications made to customers are accurate and truthful.
Appendix 1Operational Definitions
Integrity breach: as understood under AFA guidance, this term includes, in particular, corruption, influence peddling, extortion by a public official, unlawful taking of interest, misappropriation of public funds, and favoritism; for companies subject to Article 17 of Sapin II, the legal obligation specifically targets corruption and influence peddling.
Corruption: the act of proposing, promising, offering, soliciting, or accepting an undue advantage for the purpose of performing, obtaining, facilitating, delaying, or omitting an act falling within a function or activity.
Influence peddling: the act of soliciting or accepting an advantage to abuse real or supposed influence, or offering such an advantage, in order to obtain from an authority or decision-maker a favorable decision or treatment.
Third party: any natural person or legal entity in a relationship, or proposed relationship, with Iknaé Techno, including customers, suppliers, service providers, subcontractors, intermediaries, partners, business introducers, acquisition targets, and beneficiaries.
Report: a good-faith disclosure relating to a violation of the Code, an integrity breach, a serious risk, or a substantial control failure.
Partner: any legal entity or natural person with whom Iknaé Techno maintains a distribution, resale, subcontracting, integration, alliance, publishing, supply, listing, certification, or other contractual relationship involving specific compliance obligations.
Material nonpublic information: any information not available to the public that a reasonable investor would consider important to an investment decision, or that would be likely to materially affect the value of a security or another significant business decision.